Start with the treble side and then go to the bass side, return to the treble side for one last check. Match the octave (fretted) note of the first and sixth strings with their corresponding 12th fret open harmonics by shortening or lengthening the strings with the adjusting screws using the allen wrench provided. Intonation can be adjusted using the two allen set screws facing the tail end of the guitar.Ī strobe tuner or other electronic tuning device should be used. Bear in mind that the brass studs are a soft metal that could be prone to marring if adjustments are made too forcefully. Next, using a Quarter, perform the necessary height adjustments to the bridge. To adjust the mounting studs, first detune the instrument to relieve all possible string tension on the bridge. Tuning and Set-Up Hints If you are unfamiliar with making these adjustments, we recommend that the guitar be taken to a qualified repair center.Īction height is adjustable by raising or lowering the studs that the bridge sits on. Although it is pre-compensated for modern string gauges, fine-tuning is possible by adjusting the set screws at each end of the bridge. This bridge features slots that recess the strings comfortably as they pass over the top, in a gentle curve. First used in 1991 on the PRS Dragon I guitar, it now appears on three models: Paul's Guitar, McCarty and SE Paul's Guitar.
PRS WRAPAROUND BRIDGE FULL
Designed to take full advantage of the resonant properties of our guitars, the PRS Stoptail Bridge provides direct transmission of string vibration to the guitar body and makes set-up a breeze.
0 kommentar(er)
